back to the knives page

Balisongs / Butterfly Knives

Almost all of these balisong knives were made to customer specifications. With exception of the "Goblin Balisong" and "Ring Fighter Balisong" which was made in a limited numbered run from water jet cut parts (handles and blade)
The rest of the balisongs were "handmade" I chose to serialize in sequence starting with the first balisong I made. Due to the demand for custom balisong knives and the already long backlog of orders I have let build up.
"I can not accept new orders for balisong knives at this time"


"Goblin Balisong"
The goblin balisong was started in 2009 and will be a limited numbered run.
Blade: 4" from handles, CMP154. Titanium Handles, O.A.L. 9"
Special features: New retractable latch, or latchless/magnetic latch, IKBS.




2011 Goblins

The Ring Fighter Balisong

"Original Ring Fighter"
The original run of 20 "Ring Fighter" balisongs made in 2005 was sold through EDCKnives and is currently sold out. The first 20 had 4 5/8" S30V deep belly blade with sharpened swedge and maroon micata handles. O.A.L. is 10 1/2".
There was left over water jet cut parts (blade and handles) That was done with various modifications from the original 20. A total of 39 ring fighters was built.

 
Karambit-Song


#015
Blade: 3.5" x 5/32 Ats-34 Warncliffe. Handle: 4.4" 304 Stainless Steel, Ebony Wood inlays. O.A.L. 7.9" Non-tang pin construction, Rare Earth magnetic latch.


#020 Latchless, handles with indexing grooves.
O.A.L. 8 1/8" Blade 3 3/4" X 5/32" ATS-34,
satin finish, Thumb ramp Kydex neck/pocket sheath


#021
4 5/8" blade 10 1/8" O.A.L.
weight 8 oz. Spring Latch, Kingwood inlays.

 



#22
Blade: 5" ATS-34 O.A.L. 11 1/2"
Anodized titanium handles with snakewood overlays.
New type magnetic latch.
Customer design, completed Oct. 5, 2005



#023
4 1/8" 154 CM blade 316 SS handles
9 1/2" O.A.L. non-tang design
photo by: Duane Weikum



#024
Blade: 4 1/4" acid finish with bead blast design ATS-34. Handles: stainless steel, G-10 with stainless overlays, heavily textured.
Magnetic latch 9 1/2" O.A.L.

 



#025
4 1/4" Chisel ground,mirror finished bevels, satin flats, ATS-34 blade. Stainless steel handles with bolsters and Mastodon Ivory scales.
Magnetic Latch. 9 1/2" O.A.L.


#026 & 27
Mirror finished ATS34 knife & fork set.Two color, ladder pattern mokume, by Mike Sakmar, over stainless steel handles. Non-tang design and magnetic latch.
photo by: Ryan Peterson

 



#028
Blade: 4 1/2" 154 CM
Handles: 5 3/8" 316 ss O.A.L. 9 7/8"
Mastodon inlays, Magnetic Latch
May 2006

#029
Blade: 4 1/2" 154CM
Handles: 5 5/8" 316 ss O.A.L. 10 1/8"
Stone inlays, Latch
May 2006


#30
Blade: 5.060" Devin Thomas Ladder Damascus
Handles: 6" Mike Sakmar 3 color Wavy Ladder Mokeme

Photo by Abbot Genser


#31 & #32
Zenghost Design Sept. 2006
Kola wood & Carbon Fiber


#33 & #34
3" blades Oct. 2006


Spring Latch


#35 balisong-ax
Built to customer specifications. Stainless Steel Damascus by Gerome Weinand.
Blade: 5 3/8" from tang pin, 7 3/8" O.A.L. Handles: heat treated 440-C with pink ivory scales & dovetailed raindrop bolsters. Long handle, 8 1/8" short handle, 7 1/4" Spring Latch. Completed November 11, 2006

#36 Customer Design
Blade: Devin Thomas Ladder Damascus 5 3/4" from handles, 1 7/16" wide.
Handles: Timascus 7" long, O.A.L. 12 3/4" Weight: 8 oz.
Magnetic latch in closed position. Outline of knife is symmetrical in closed position. Completed in February, 2007


Open and closed photo by Ryan Peterson.

Prototypes April 2007
Scimitar type blade has textured carbon fiber handles,
with removable magnetic latch.
Sheepfoot blade has G-10 handles.

1st. IKBS Prototype
3 1/8" CMP154 blade Titanium Handles 7 5/8" O.A.L.
Removable magnetic latch. April 2007

#037
3 1/2" CMP154 blade, Titanium handles, 7 3/4" O.A.L.
magnetic latch


#040
Blade 5 3/4" Odin's Eye Damasteel.
Textured titanium handles 12 1/2" O.A.L.
IKBS pivots. Sept. 2007


#042
Jon Kim Design

CMP154 blade, Titanium & textured G-10 handles.
magnetic latch. Nov. 2007


#046 "Tuan Design"
Blade: 3 1/16" D-2 steel.
Handles: Damascus/Titanium, O.A.L. 7 1/4"
February 10, 2008





#053
Blade: 4 5/8" CMP154
Titanium liners, SS bolsters, stag scales. 10" O.A.L.
IKBS, Latchless, 7.37 oz. Sept. 2008


#055
Blade: 4 1/2" CMP154
Titanium liners, SS bolsters, synthetic Abalone.
IKBS, latchless. April 2009


#057
Blade: 3 3/4" CMP154
Handles: Titanium liners, bolsters, micata scales.
8 3/8" O.A.L. Spring latch, pocket clip, stonewash finish.
June, 2009


#060 & #061
060, blade: etched 3 1/2" 154CM.
SS handles with G-10 overlays, 8" O.A.L.
061, tanto blade, 154CM
SS handles, with carbon fiber overlays.
July 2, 2010


#065
Blade: 4 7/8" 440-C, O.A.L. 11"
Stainless steel handles, red carbon fiber inlays, magnetic latch.
Titanium mask with bearings. "500 magnum" design.
March 1, 2011


#067
Blade: 4.400" CMP154, stonewash, 9.900" O.A.L.
Anodized/textured Titanium handles, spring latch.
April 10, 2011


#069 & #077
Blade: 4 1/2" CMP154. O.A.L. 10"
Stainless Steel handles, stonewash finish, magnetic latch.
July 17, 2011


#073
Blade: 5" Rob Thomas "Reptilian" Damascus
Mike Sakmar Mokome handles, black lip MOP inlays.
IKBS, magnetic latch.
December 8, 2011


#075
Blade: 5 1/8" CMP154, O.A.L. 11 3/16"
Titanium liners, damascus bolsters, IKBS, retractable latch.
December 9, 2011


#078 & #079
Blades: 4 1/2" & 3 1/4" 154CM, O.A.L. 10" & 7 1/2"
Titanium liners, pocket clip & O.D. green G-10
March 28, 2012


#086 & #087
Blade and fork made with Chad Nichols Damascus
IKBS, Spring Latch
Aug. 2012


#092
Titanium handles, IKBS
February 2013


#095
Titanium handles, pocket clip, spring latch, IKBS
March 2013

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


 

 

 

 

 

 

 

 

 

 

 

 

 

 


 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

#038 & #039
Mirror finished CMP154 blade/fork
titanium handles, magnetic latch
Sept. 2007


#041
Jon Kim Design
Blade: 5 1/4" CMP154
Titanium liners, Carbon fiber scales & Stainless Steel Bolsters. 11 1/2" O.A.L. IKBS Nov. 2007



#044 & #045
Blades: 3 3/4" 154CM O.A.L. 8 1/2"
Stainless Steel Hanldes, IKBS
#044 Tiger stripe G-10, 7.9 oz.
#045 Natural Micata, 6.9 oz. January 15, 2008



#047
Blade: 4" CMP154 "Kriss"
Handles: Stainless Steel with Snakewood inlays
IKBS & spring latch February 25, 2008


#052
Blade: 5 1/4" CMP154
Titanium liners, SS bolsters, micata scales. 11 3/8" O.A.L
IKBS, Latchless 7.3 oz . Aug. 2008


#054
Blade: 4 1/4" CMP154
Stainless steel handles IKBS 9 3/8" O.A.L. Oct. 2008


#056
Blade 3 1/2" 154CM
Handles, stainless steel, O.A.L. 8" Stonewash finish.
May 2009


#059
Blade: 3 5/8" Devin Thomas SS Damascus "twist"
Handles: Anodized titanium with carbon fiber inlays.
8 1/2" O.A.L. left handed pocket clip, IKBS.
June 20, 2010


#064
Blade: 3 1/2" ATS-34, O.A.L. 8"
Titanium handles & bolsters, magnetic latch.
Green linen micata scales.
Feb. 2 2011


#066
Blade: 4" 440-C, 9"O.A.L.
Stainless steel handles, red carbon fiber inlays.
IKBS, magnetic latch, "500 magnum" design.
April 15, 2011


#068
Blade: 4 1/2" 154CM, O.A.L. 10" Spring Latch.
Stainless Steel handles with snakewood inlays.
May 15, 2011


#071
Blade: 4 3/8" D-2. O.A.L. 9 5/8"
Titanium handles with black canvas inlays. magnetic latch.
August 23,2011

#074
Blade: 5 3/4" "Odins Eye" Damasteel
Titanium hanldes, IKBS, 12 1/4" O.A.L.
December 10, 2011


#076
Blade 12" A2, O.A.L. 24"
Stainless Steel handles July 4, 2012


#083 & #084
Blades: 4 1/2" & 3 1/4" 154CM O.A.L. 10" & 7 1/2"
Titanium liners, pocket clip & natural linen micata.
April 4, 2012


#091
6" CMP154 blade, 13" O.A.L.
Titanium handles, IKBS, Spring Latch
October 2012


#093 & #094
Titanium handles, pocket clip, IKBS
March 2013


 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


 

 

 

 

 

 

 

 

 

 

 

 

 

 


 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 



 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

back to the knives page

All Scripture is given by inspiration of God, and is profitable for doctrine, for reproof, for correction, for instruction in righteousness, that the man of God may be complete, thoroughly equipped for every good work.
2nd. Timothy 3:16 KJV

ZENGHOST Designs ©2004